Wireless IP Camera
Feature:
Specification:
| Models | Gen47 |
| Power | DC 5V, 1A |
| Processors | RISC CPU, hardware video processing and compression. |
| Network interface | Ethernet 10BaseT/100BaseTX, Auto-MDIX, RJ-45 |
| Wireless interface | IEEE 802.11g 6 - 54 Mbps |
| IEEE 802.11b 1 - 11 Mbps | |
|
Transmit power:
14.5dBm typically @ 802.11g 17.5dBm typically @ 802.11b |
|
|
Receiver
sensitivity: 54Mbps: Typical -73dBm @ 10% PER 11Mbps: Typical -86dBm @ 10% PER |
|
| Antenna gain: 1.8 dBi | |
| Image sensor | RGB VGA 1/4 inch CMOS |
| Automatic exposure control, automatic white balance, automatic gain control, automatic brightness control. | |
| Light sensitivity | 1.9 Lux |
| Lens | 3.2 mm, F2.0, viewing angle: 60.3°, fixed iris.focus range: 30 cm to infinity |
| Buttons | One reset button, to factory default settings |
| Indicators | One LED for internet connection status indication |
| One LED for Ethernet connection indication | |
| Enable/disable – web configurable | |
| Video compression | MPEG-4 Part 2 (ISO/IEC 14496-2) with motion detection, profiles: Simple Profile, level 0-3 |
| Frame rate | Up to 30 fps in all resolutions |
| Video streaming | MPEG-4 Controllable frame rate and bandwidth |
| Video settings | Resolution: VGA(640x480), QVGA(320x240), QQVGA(160x120) |
| Bandwidth: 64k, 128k, 256k, 512k, 768k, 1M, 1.2M, 1.5M bps | |
| Frame rate: 5, 10, 15, 20, 25, 30 fps | |
| Audio | Built-in microphone for audio monitoring |
| Audio compression:MP2 audio, AMR-NB for 3GPP/ISMA(RTSP streaming) | |
| Security | Web management username/password protection |
| Video display ID/password protection | |
| WiFi WEP and WPA security mode | |
| Installation, management and maintenance | Installation tool on CD and Web-based configuration |
| Automatic configuration backup and restore | |
| Video management software-CamView for video access and multi-camera management | |
| Firmware upgrades via FTP | |
| Minimum Web browsing and management software requirements | Built-in web server for standard web browser access |
| Pentium 4 CPU 1.0 GHz or higher, or equivalent AMD 256 MB RAM | |
| Supported protocols | IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, IGMP, RTCP, SMTP, SNTP, FTP, DHCP, UPnP, ARP, DNS, PPPoE, etc. |
| Accessories (included) | Power adaptor, camera bracket, RJ45 ethernet cable, quick installation guide, CD with installation tool/software and User's Manual, ID/Password card, antenna(for IC202). |
| Video management software | Surveillance application for viewing and archiving up to 16 cameras |
| Users | Up to 20 simultaneous unicast users(dependent on video settings) |
| Alarm and event management | Events triggered by video motion detection |
| Notification/upload of JPEG images over FTP and/or email | |
| Dimensions (HxWxD) and weight | 125 x 75 x 35 mm, 260 g, incl. camera bracket, excl. power adaptor |
| Approvals | EMC - CE, FCC Part 15 Subpart B Class B |
| Wireless RF - CE, FCC Part 15 Subpart C | |
| Power supply: CE, FCC, UL, EN 60950 | |
| Operating conditions | 0°C - 50 °C |
| Humidity 20 - 80% RH (non-condensing) |